background image
M:\Product Information\243-768\Docs\243-768_243-778_243-788_243-798_243-818_243-828_243-838_243-848_257-168_257-178_257-
188_257-198_980-271_Side Curtain Kits_MG TC, TD, TF_Instructions.doc
Created on 11/18/2005 4:15:00 PM Created by grantm
Page 2 of 9
42
43
44
45
46
47
48
49
50
Part 1 - Identifying What You Have

Moss Motors supplies a variety of side curtain kits and this documentation will help you make sure you have the
right bits for your car before you begin. Please remember, once you cut, trim tweak or fit a piece of upholstery, it’s
yours. With the identification of the bits out of the way, we will take you through the process of fitting the side
curtain covers to the frames to achieve satisfactory results regardless of which T Series car you have.

The current listing of available “Side Curtain Kits “ appears below.
Appl /PN
Search Description
MG TC
257-168
Side Curtain KIT, OE TYPE CANVAS DUCK
243-778
Side Curtain KIT, STAYFAST, BLACK
243-768
Side Curtain KIT, STAYFAST, TAN
MG TD W/ 2 BOW TOP FRAME
257-178
Side Curtain KIT, OE TYPE CANVAS DUCK
243-798
Side Curtain KIT, STAYFAST, BLACK
243-788
Side Curtain KIT, STAYFAST, TAN
MG TD W/ 3 BOW TOP FRAME
257-188
Side Curtain KIT, OE TYPE CANVAS DUCK
243-828
Side Curtain KIT, STAYFAST, BLACK
243-818
Side Curtain KIT, STAYFAST, TAN
MG TF
257-198
Side Curtain KIT, OE TYPE CANVAS DUCK
243-848
Side Curtain KIT, STAYFAST, BLACK
243-838
Side Curtain KIT, STAYFAST, TAN
51
52
53
54
55
56
57
58
59
60
61
62

Each kit should come with a detailed breakdown of the components to facilitate communication.

The complete kits (listed above) include
Four side curtain covers
Four steel frames in gray primer, drilled for the side curtain cover hardware
Polished stainless steel finishing strips with “spooned ends” please note that The finishing strips
in all of our complete side curtain kits have “spoon” ends, correct for TD and TF. For TC owners
who are die-hard purists or Concours enthusiasts, our “do-it-yourself” finishing strip kits include
over-length strips which must be custom mitered to duplicate the originals.
Special bolts with “T” heads, and nuts