[ Home ] [Tech Index ] [ Picture This ] [ Autojumble ] [ Car Lists ] [ Search ] [ The53 ] [ FYI ] [ Ttalk ]

ARB Questions
The text below was received on 1/4/09:


I am the proud owner of a MG TF 1953 and in the process of restoring it. I have bought an Anti Roll Bar from Moss, and I have read your description of the mounting of the Anti roll Bar. Everything worked out fine, until I realized that when you turn the wheel to the outer position, the anti roll bar will press against the tie rod end – even before it is turned to the full outer position. I have shortened the endlinks to 4 3/8” like you describe, but the problem is still there. Have you experienced the same problem, and have you done something to avoid it, - or do you just “live with it”?

I enclose a few photos to show the problem. I should be very happy to hear from you. Thank you very much!

Best regards,

Erik Thesbjerg

DK-7500 Holstebro

Here are Erik's Photos: (thumbnail form, click to enlarge)

Erik's initial question is directed to John Progess.  If anyone can answer Etik's questions, please do so here --Erik.  I'd also appreciate a copy to my address below.

Return to ARB page

(508) 746-6735
created 1/4/09